- Pour a cup or two of white vinegar into the toilet bowl, let it sit overnight, then brush well and flush.
- A good maintenance cleaner for your toilet bowl is ordinary baking soda. It also helps with those toilet odors.
- Another solution you might want to try is pouring a can of cola into the bowl. Leave to sit overnight if possible. Brush well the next day. [Editor's note: cola contains small quantities of phosphoric acid that will dissolve mineral deposits on your bowl]
Toilet Rust Stains
- Fine sandpaper or a pumice stone [used wet] will usually remove really bad rust stains.
- Make sure you put your cleaner on a stiff-bristled toilet brush and get it right under the rim. Otherwise the holes there that release the water will tend to clog up
- I don't believe in cleaning a toilet with bleach. If you forget and use a cleaner that has ammonia in it, as soon as the ammonia mixes with any bleach residue, you could get very toxic fumes. Think about it: urine has some ammonia in it too. I'm staying away from bleach in my toilet!
- Take a bucketful of water and throw the contents into the toilet bowl before you start cleaning it. This actually forces the water level down in the toilet bowl and allows you to access those bowl rings, etc., easier.
- It's a good idea to rub some ordinary automotive grease or petroleum jelly around the rim of your rubber toilet plunger. This helps provide a good seal for your plunger when it comes time to unclog your toilet.
- Keep all those ugly bacteria off your toilet brush by swishing it around in a 50/50 solution of bleach and water every couple of weeks or so. Don't forget to rinse it off thoroughly with soap and water afterward and don't clean it with a cleaner that contains ammonia.
- We prefer to use the brushes that have a plastic bristle core rather than a metal wire core. The plastic is less likely to mark the surface of your toilet bowl.
- It's usually not a good idea to leave any toilet cleaner in the toilet bowl while you're away from home ... even for a weekend. The cleaner sitting in the water may harm the surface of the toilet bowl if it is left on too long.
- What you can do, though, is stretch a sheet of plastic cling wrap over the bowl and leave it on while you're away from home. This will help stop the water evaporating too quickly and will keep the water level constant, which, in turn, helps keep the toilet rings away.
Adapted and reprinted by arrangement with New American Library, a member of Penguin Group (USA) Inc., from Haley's Cleaning Hints by Graham Haley and Rosemary Haley. Copyright © 2000 by 3H Productions, Inc.
The Housekeeping Channel (HC), a for-profit educational LLC, provides the information on HousekeepingChannel.com as a free service to the public. The intent is to disseminate accurate, verified and science-based information on cleaning and housekeeping.
While an effort is made to ensure the quality of the content and credibility of sources listed on this site, HC provides no warranty - expressed or implied - and assumes no legal liability for the accuracy, completeness, or usefulness of any information, product or process disclosed on or in conjunction with the site. The views and opinions of the authors or originators expressed herein do not necessarily state or reflect those of HC: its principals, executives, Board members, advisors or affiliates.